Lan Settings - Canon TX-3100 Online Manual

LAN settings

Select this setting item from HOME screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
• Wi-Fi •
The following setting information on the Wi-Fi connection is displayed. (Some items are not displayed
depending on printer settings.)
Items
Connection
Network name (SSID)
Communication mode
Channel
Wi-Fi security
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv4 DNS dynamic settings
IPv4 DNS host name
IPv4 DNS domain name
IPv6 link-local address
IPv6 link-local prefix length
IPv6 manual address
IPv6 manual prefix length
IPv6 stateless address 1
IPv6 stateless prefix length 1
IPv6 stateless address 2
Setting
Enable (connected) / Enabled (disconnected) / Disable
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)
Infrastructure
XX (up to 2 digits)
Disable / WEP (64 bit) / WEP (128 bit) / WPA-PSK
(TKIP) / WPA-PSK (AES) / WPA2-PSK (TKIP) / WPA2-
PSK (AES)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
Enable / Disable
XXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXX (up to 64 characters)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX (up to 3 digits)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
241