Canon TX-3100 Online Manual page 336

• • When OFF or Command priority is selected for Detect image size and Disable is selected for
Oversize:
C: Position of cut
Cut at length of command-specified image drawing range.
• • When OFF or Command priority is selected for Detect image size and Enable is selected for
Oversize:
D: Position of cut
Cut at length of upper and lower margins added to length of command-specified image drawing
range.
• • When Detected size is selected for Detect image size and Disable is selected for Oversize:
E: Position of cut
Cut at length of minimum image range detected.
336