Canon TX-3100 Online Manual page 110

• • When selecting Barcodes in Manage remaining roll amount and if the barcode is not
printed.
◦ When selecting Manual in Media type selection method. ◦
A menu for selection of the media type and length is shown on the touch screen.Operate the
touch screen, select the media type to be used, and enter its length.
◦ When selecting Auto with confirmation in Media type selection method. ◦
A menu for selecting the estimated media type candidates and the paper length. Interact with
the touch screen, select the media type you want to use, and enter the length.
◦ When selecting Auto detect in Media type selection method. ◦
A menu for selecting the estimated media type candidates and the paper length.After 5
seconds, the paper type of the first item is selected. If you choose a different candidate, you
can use the touch screen to select the type of paper you want.
◦ When selecting Use current media type in Media type selection method. ◦
A menu for selecting the media type and the paper length appears on the touch screen. After 5
seconds, the media type will be selected with the fixed paper kind.
Important
• • Cut the edge of the roll using the Cut paper function if the edge is creased or soiled. (See
"Specifying the Cutting Method for
• When selecting the media type on the touch screen, make sure the media type set in the printer •
driver and the media type loaded on the printer match.
Note
• If you have selected Auto with confirmation or Auto detect in the Media type selection •
method and you are using the barcode to manage the remaining roll paper, the barcode is read
first. If it fails to read the barcode, it will detect the media type from the estimated result and
display the candidate.
• • For details on media types that you can select, see "Paper Information List."
• • Adjusting the printhead alignment with the type of paper to be used in printing may enhance
printing quality. (See
Rolls.")
"Automatic Adjustment to Straighten Lines and
110
Colors.")