Canon TX-3100 Online Manual page 102

edge appears on platen, lower the release lever, and then proceed to the next step. However,
if Paper retention settings is set to Release, automatic switching of the upper and lower
rolls is not possible.
3. 3. Lower output guide.
4. 4. Close top cover.
• • When selecting Enable in Roll paper auto feed.
The roll paper is fed.
• When selecting Disable in Roll paper auto feed. •
Tap Start feeding, and then the roll paper is fed.
Once paper feeding starts, you will need to do the following, based on the Manage remaining roll
amount setting, the barcode printed on rolls, and the Media type selection method setting. (See
"Keeping Track of the Amount of Roll Paper
• When selecting Disable or Auto estimate in Manage remaining roll amount. •
◦ ◦ When selecting Manual or Auto with confirmation in Media type selection method.
A menu for selecting the media type appears on the touch screen. Operate the touch screen
and select the media type to be used.
◦ When selecting Auto detect in Media type selection method. ◦
You'll see candidate for the media type you've estimated to the touch screen. After 5 seconds,
the paper type of the first item is selected. If you choose a different candidate, you can use the
touch screen to select the type of paper you want.
Left.")
102