Advertisement
Available languages
Available languages
4.3.16 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be cancelled. End/Cancel light will flash continuously to notify that
the programme has been canceled.
When you turn the Programme Selection knob, the machine will end the programme but
will not discharge the water inside. When you select and start a new programme, the newly
selected programme will start depending on the step the previous programme was canceled
in. For example, the machine may take in additional water or continue to wash with the water
inside.
C
Depending on the step where the programme was canceled in, you may have to add detergent and
softener again for the programme you have selected anew.
4.3.17 End of programme
At the end of the programme, "End" will be displayed.
1. Wait until the light of the loading door goes off completely.
2. Switch the programme selection knob to On/Off to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is now ready for the next washing
cycle.
4.3.18 Your machine has the "Pause Mode" function.
After using the On/Off button to switch on the machine, if you do not start any programme in the
selection step or do not perform anything else, or if you do not do anything in 10 minutes after the
selected programme has ended, the machine will automatically switch to energy saving mode. Also, if
your product has a display that shows programme time, this display will completely turn off. If you turn
the Programme Selection knob or touch any button, the lights and the display will switch back to the
previous position. The selections you make when exiting the energy efficiency mode may change. Check
if your selections are correct before starting the programme. If necessary, make adjustments again. This
is not an error.
Washing Machine / User's Manual
51 / EN
Advertisement
