Table of Contents
Advertisement
SeCtION 1 |
do not AlloW the ends of the positive and negative wires to touch each other.
Fuse Replacement
Ensure properly rated fuse (250V, 4A) is used in each of the modules.
environment
do not expose power supply to rain, snow or water spray
dis-assembly And Repair
The power supply should be disassembled or repaired by a qualified technician. Incor-
rect reassembly or repair may result in a risk of electric shock or fire which may result in
personal injury and property damage.
SeCtION 2 |
description
This is a 19", 2u height (3.5") Rack mount power supply which converts 230V,
50/60 hz. AC power into regulated 14.2 VDC , +/- 1% (at module output*) delivering up
to a maximum of 100A continuous (up to 115A surge) with 5 base level PCB modules.
There is provision to connect the power supply to an external battery for backup power
in the case of an AC power failure and re-charge the battery when AC power resumes.
* Voltage at output terminals load + & load - will be 13.8V nominal
(please see page 12 for explanation.)
• PROVIDES N + 1 REDUNDANCY
• ALLOWS CONNECTION OF EXTERNAL BATTERIES FOR BACKUP
• EXPAND OUTPUT POWER BY ADDING POWER MODULES
• UP TO 100 AMPS CONTINUOUS POWER
• VOLT / AMPERE METER
• OPERATION STATUS L.E.D.
• FAN FAILURE ALARM AND WARNING L.E.D.
• REMOTE MONITORING AND INDICATION
• 19" RACK MOUNT
• 2 YEAR WARRANTY / TOLL FREE TECHNICAL SUPPORT
Applications
The unit is designed for the following applications:
1. N+1 redundant systems
2. future power level expansion
3. un-interrupted DC output when used in conjunction with an external battery backup.
6 | SAMLEX AMERICA INC.
Important Safety Instructions
Description & applications
Advertisement
Table of Contents
