Ptz Trace Menu; Recording Pan/Tilt And Zoom Operations; Playing Pan/Tilt And Zoom Operations - Sony BRC-X1000/H800 Operation Instructions Manual

PTZ TRACE Menu

PTZ TRACE is a function used to record pan/tilt/zoom
operations, controlled by the remote commander or a
remote controller, and then to play back the operations
as required. Up to 16 pan/tilt/zoom positions can be
recorded for up to 180 seconds.
Notes
• If pan and tilt limits are configured in the PAN TILT/
ZOOM menu after recording operations, the pan and
tilt limits are not applied upon playback.
• To use the PTZ TRACE function and pan/tilt limit
function together, first configure the PAN and TILT
settings in the PAN TILT/ZOOM menu and then use
the PTZ TRACE function.
• Recorded operations will be erased if the IMG FLIP
setting or camera operating frequency setting is
changed.
• Playing operations will restore CLEAR IMAGE
ZOOM, RAMP CURVE, and PAN TILT SLOW to
their states held during recording.
TRACE NO: Select the TRACE number to record, play
back, or delete.
RECORD: Record operations.
PLAY: Play back the recorded operations.
DELETE: Delete the recorded operations.
RECORDED TRACE NO: Displays the recorded
TRACE numbers.
ELAPSED TIME (SEC): Displays the elapsed time
during recording or playback in seconds.
The HOME button (equivalent to ENTER) on the
supplied remote commander corresponds to the joystick
button on an optional remote controller.
For details, refer to the operating instructions of the
remote controller.
Recording pan/tilt and zoom
operations
1
Select the trace number you want to record
in TRACE NO.
2
Move the cursor to RECORD, and press the
HOME button.
*SETTING(ENTER TO START REC)* is
displayed at the bottom of the screen.
3
Move to the record start position, and press
the HOME button.
*RECORDING(ENTER TO START STOP)* is
displayed at the bottom of the screen.
4
Perform the pan/tilt and zoom operations
you want to record.
During recording, the ELAPSED TIME(SEC)
number at the bottom of the screen increases in
increments of 1.
During recording, the menu screen display
continues.
Note
If using the remote commander, pan/tilt and zoom
operations cannot be performed simultaneously.
5
Press the HOME button to stop recording.
The recorded trace number is displayed under
RECORDED TRACE NO.
Note
The recording automatically stops after the
maximum recording time has elapsed.
Playing pan/tilt and zoom
operations
1
Select the recorded trace number you want
to play in TRACE NO.
The recorded traces numbers are displayed under
RECORDED TRACE NO.
2
Move the cursor to PLAY, and press the
HOME button.
*READY FOR PLAY(ENTER)* is displayed at the
bottom of the screen, and the camera moves position
to the recorded pan/tilt/zoom start position.
3
Press the HOME button to begin playback.
The recorded pan/tilt/zoom operations are played
back, and the ELAPSED TIME(SEC) number
increases in increments of 1.
43