Download Print this page

Point To Multi-Point Audio Transmission; Db91-Tx And Db91-Rx Set-Up - DEVA Broadcast DB91-TX Setup Instructions

How can the db91-tx be set to act as a streaming audio server, sending audio to db91-rx decoder/s used as an ip audio client

Advertisement

POINT TO MULTI-POINT AUDIO TRANSMISSION

IMPORTANT NOTE:
in order for stable connectivity to be guaranteed, the recommended number of clients is 8.

DB91-TX AND DB91-RX SET-UP

Prior to implementing the below written adjustments, the following requirements should be
fulfilled:
DB91-TX must have a static IP address;
If the device is placed behind a router, you will have to make sure that the Stream Server
Port is properly NAT forwarded;
DB91-RX may have a dynamic IP address;
DB91-RX should have access to DB91-TX over the network (Internet or LAN).
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
One DB91-TX can send audio to maximum ten DB91-RXs. However,
- 5 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700

Advertisement

loading
Need help?

Need help?

Do you have a question about the DB91-TX and is the answer not in the manual?

Subscribe to Our Youtube Channel