Table of Contents
Advertisement
CONNECTING THE SIDE BURNER
4
5
Leak test procedure
•
Ensure all gas valves are in the 'OFF' position.
•
In a small container, mix a solution of water and detergent
or soap.
•
After connection of the hose, turn on the gas supply at the
gas bottle.
•
Using a brush apply the solution to all gas connection
points and look for bubbles forming.
20
CONNECTING THE SIDE BURNER
B
Connect the other side of gas hose
(B) to the BBQ connection using 2
spanners.
WARNING
WARNING
To ensure gas tight connections,
complete the gas leak test procedure
before and after gas hose connection
and after every reconnection of the gas
cylinder. Failure to do so may result in
a fire or explosion.
•
Bubbling will indicate a leak.
•
Turn off the gas supply and re-tighten the joint.
Repeat the leak test.
•
If the leak persists, turn off the gas at the bottle and contact
a licensed gas fitter to correct.
Advertisement
Table of Contents
