Beef Eater 1200 Series Assembly And Operating Instructions Manual page 19

CONNECTING THE SIDE BURNER
1
2
1 bolt (SCREW M6 X 12.3)
1 bolt (SCREW M6 X 12.4)
1 bottle (9KG GAS BOTTLE.1)
1 hose (HOSE GAS BOTTLE TO SIDE BURNER.1)
1 hose (HOSE MANIFOLD TO SIDE BURNER.1)
For models without side burner and side table, do not disconnect the gas hose and skip steps 1-4 on page 19
3
A
VIEW FROM REAR
B
VIEW FROM REAR
When connecting to side burner, remove
the regulator assy hose (A) as pictured
below left:
Gas connection 3/8" SAE Flare with
5/8-18 UNF thread
A
Then connect it to the side burner like
this (the 90 degree elbow must be on
outside as pictured on left):
Connect the gas hose and regulator
assembly (A) to the side burner
connection using 2 spanners.
Connect the gas hose (B) to the
remaining connection on the side
burner using 2 spanners.
z
y
x
ASSEMBLING THE BARBECUE
19 19