Xorcom XP0150G Quick Reference Manual page 2

Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
2. Enter the number, and then press the Send soft key.
Note: During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the Headset key or the Speakerphone key or picking up the handset. Headset mode requires a
headset connected.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can ignore an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the Cancel soft key.
Using the speakerphone:
Press or the Cancel soft key.
Using the headset:
Press the Cancel soft key.
Redial
Press to enter the Dialed Calls list, press
press or the Send soft key.
Press twice when the phone is idle to call the last dialed number.
Call Mute and Un-mute
Press to mute the microphone during a call.
Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press or the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only a call on hold, press
XP0150G Quick Reference Guide
.
to activate the headset mode.
or to select the desired call, and then
or the Resume soft key.
If there is more than one call on hold, press
press or the Resume soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press or the Transfer soft key.
Semi-Attended Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or the Transfer soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
Always Forward----Incoming calls are all forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded when the phone is not answered
after a preset time period.
3. Enter the number you want to forward to. For No Answer Forward, enter the ring time to wait
before forwarding.
4. Press the Save soft key to accept the change.
Call Conference
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers. All parties are now joined
in the conference.
4. Hang up the handset to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
Speed Dial
To configure a speed dial key:
1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.
2. Select the desired DSS key, and then press the Enter soft key.
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, and enter
the number in the Value field.
4. Press the Save soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
or to select the desired call, and then
.
.
XP0150G Quick Reference Guide