Chopper - Philips HR2170/50 Manual

4 Set the control knob to 0 and remove the blender jar from the motor unit.
5 Pour out the drink through the spout of the blender jar (Fig. 9).
Make sure the lid is closed and the measuring cup is in the lid. This prevents pulp and skins from
ending up in your drink.
6 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening/removing the lid. Then let the appliance run for a few more seconds.
7 Pour out the rest of the drink.
8 When you have finished processing, set the control knob to 0 and unplug the appliance.
Tips
- When you process a large quantity, we advise you not to put all the ingredients in the filter at
the same time. Start to process a small quantity and let the appliance run for a few seconds.
Then switch off the appliance and add another small quantity. Repeat this procedure until you
have processed all the ingredients. Always keep the lid on the blender jar during processing.
- To get the best result when you make fruit juices and cocktails, add approx. 300ml water to
150g fruit. You can also use other liquids, e.g. to make cocktails.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Mill (HR2168/HR2167/HR2161 only)
You can use the mill to grind and chop ingredients such as peppercorns, sesame seeds, rice, wheat,
coconut flesh, nuts (shelled), coffee beans, dried soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.
Preparing the mill for use
1 Put the ingredients in the mill beaker (Fig. 10).
Note: See the mill table at the end of this user manual for the recommended quantities and processing
times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 11).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 12).
using the mill
1 Switch on the appliance.
We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
2 When you have finished processing, set the control knob to 0 and unplug the appliance.
3 To remove the mill from the motor unit, turn the mill anticlockwise.
Chopper (HR2168 only)
You can use the chopper to chop ingredients such as onions, meat, herbs, vegetables, fruit, chocolate,
firm cheese, baby food and nuts.
EnglisH
11