Alarm.Com ADC-V523 Installation Manual page 6

WPS Mode
Add the Camera to an Alarm.com Account
To ensure sufficient Wi-Fi signal, complete these
steps with the camera near its final location but prior
to mounting.
1
Connect the camera's AC power adapter and plug it
into a non-switched outlet.
2
Hold down the WPS button and release when the
LED begins to flash blue (about 3 seconds).
3
Activate the WPS Mode on the router. The ADC-
V523 will begin to connect to the wireless network.
The LED will be solid green when the connection is
complete.
4
Add the device to the account by either selecting the
account in MobileTech OR by using a web browser
and entering the following URL:
www.alarm.com/addcamera
ADC-V523 Installation Guide 5