Ethernet Mode - Alarm.Com ADC-V523 Installation Manual

Ethernet Mode

Add the Camera to an Alarm.com Account
1
Using an Ethernet cable, connect the camera to
the network.
2
Connect the camera's AC power adapter and plug it
into a non-switched outlet.
3
Add the device to the account by either selecting the
account in MobileTech OR by using a web browser
and entering the following URL:
www.alarm.com/addcamera
4
Select the camera from the video device list or type
in its MAC address to begin adding the camera.
The camera's MAC address is located on the back
of the camera.
5 Follow the on-screen instructions to finish adding the
camera. You may configure camera settings from the
Customer Website.
2 ADC-V523 Installation Guide