Indoor Dome (ADC-V820) - Installation Guide
Required items for installation:
• ADC-V820 camera and power adapter (included)
• Broadband (Cable, DSL, or Fiber-optic) Internet connection with router
• Personal computer or web-capable tablet
• Login/password for the customer's Alarm.com account
• An Ethernet cable
Install the cameras:
1. Connect the camera's AC adapter and plug it into a non-switched outlet.
2. Use a standard Ethernet cable to connect the video device to the network router. For more information about
connecting video devices using PoE, see
3. Wait a few minutes for the camera to connect to the Internet.
4. Add the video device to the account using either MobileTech, or entering the following web
address:
www.alarm.com/addcamera
5. Follow the on-screen instructions to add and set up the video device. For more information about adding a camera
to an account, see
6. Once the camera is enrolled on the account, power down the camera and install it in its final location using the
included hardware.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Dome_ADC-V820/Indoor_Dome_(ADC-
Connect a video device using Power-Over-Ethernet
to access the Customer Website.
Enroll the video device to the customer
account.
Updated: Wed, 10 Apr 2019 17:47:56 GMT
(PoE).
1
Need help?
Do you have a question about the ADC-V820 and is the answer not in the manual?
Questions and answers