Canon REALiS 4K5020Z User Manual page 189

Projector Web Screen Menu
Item
PJLink
PJLink authentication
Password
Confirm password
Notify 1
Notify 1 IP Address
Notify 2
Notify 2 IP Address
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron]
The [Crestron e-Control] screen will open. For details on the Crestron Controller,
visit the Crestron website.
http://www.crestron.com
Explanation
Turn the PJLink function on or off. If
[OFF] is selected, the other settings in
this screen cannot be configured.
Select whether to turn the PJLink
authentication function on or off. If
[OFF] is selected, it is not possible to
change the following items.
[Password]
[Confirm password]
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 – 32 characters).
For confirmation, enter the same
password that you entered in
[Password].
Specify whether to send spontaneous
state notification. Choosing [OFF] will
prevent you from configuring [Notify 1
IP Address].
If [Notify 1] is [ON], specify the IP
address to receive notification.
Configure for notification to multiple
recipients.
If [Notify 2] is [ON], specify the IP
address to receive notification.
189
Factory default setting
ON
ON
system
system
OFF
<Blank>
OFF
<Blank>