Canon REALiS 4K5020Z User Manual page 145

Table of Contents

Advertisement

Menu Description
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If a wired remote control is used, there is no need to set the remote control channel.
Option
Ch1
Ch2
Select the remote control channel to use with this projector.
Ch3
Ch4
Independent
Can be controlled from a remote control set to any channel.
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Ch1
Hold down both the Ch button and [1] button for 3 seconds.
Ch2
Hold down both the Ch button and [2] button for 3 seconds.
Ch3
Hold down both the Ch button and [3] button for 3 seconds.
Ch4
Hold down both the Ch button and [4] button for 3 seconds.
Independent
Hold down both the Ch button and [0] button for 3 seconds.
[INPUT A-C] button settings
Select input signals to assign to INPUT A-C buttons on the remote control. This enables
direct selection of the input signals.
Option
INPUT A
Choose from the following input signals to assign: [Disable], [HDMI-1],
INPUT B
[HDMI-2] or [HDBaseT].
INPUT C
Audio in terminal select
> [System settings] >
Select the terminal for audio input used with various input signals.
Submenu
HDMI-1
HDMI-2
HDBaseT
[Audio in terminal select]
Select the terminal for audio input.
Option
Off
No audio is output.
HDMI-1
Use HDMI-1 audio signals for audio output.
HDMI-2
Use HDMI-2 audio signals for audio output.
HDBaseT
Use HDBaseT audio signals for audio output.
145
Function
Function
Function
Function

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realis 4k6020z2503c0022504c002

Table of Contents