Menu Description
Checking Projector Information
You can check information about the signal types of the images projected
and other information.
Menu
Model name
Input signal
Firmware
Serial no.
Projector usage time
IP address (wired)*
IP address (wireless)*
Projector name*
Comments*
System information ID
* No value is displayed when [Network (wired/wireless)] is set to [Off/Off].
Some values may not be displayed, depending on [Network (wired/wireless)]
settings. ( : displayed, —: not displayed)
Network
(wired/wireless)
IP address (wired)
IP address (wireless)
Projector name
Comments
Shows the model name.
Details of the input signal currently selected
Information such as the type, resolution, frequency, and color
format of the signal is displayed.
Current firmware version
Serial number unique to this projector
Shows the total time the projector has been on.
IP address (IPv4) for wired connections.
IP address (IPv4) for wireless connections.
Name which identifies this projector on the network
Comments such as the location in which the projector is installed
are displayed (P188).
System information. Normally this is not displayed.
Off/Off
On/Off
—
—
—
—
—
173
Function
On/On
Off/On
(Pj AP)
(Pj AP)
—
Off/On
(Infra)
—