Canon REALiS 4K5020Z User Manual page 130

Menu Description
EDID mode setting
Switch to a mode for compatible signals, as registered in the HDMI-1 or HDMI-2 EDID.
Submenu
HDMI-1
EDID mode
HDMI-2
EDID mode
RGB alignment
Correct color misalignment.
Submenu
Enables adjustment of misalignment in 1-pixel increments.
Micro-digital
image shift
Color misalignment affecting the entire image can be corrected by
moving red, green, or blue components into position, in 1-pixel
increments.
Registration
Audio is muted while the chart is shown.
Option
Wide Wide-bandwidth 9–18 Gbps signals (such as 8-bit 4K
bandwidth YCbCr 4:4:4 at 60 Hz or 10-bit 4K YCbCr 4:4:4 at
(4K60Hz) 24 Hz) are registered in the EDID.
High Select in case of incorrect video or audio output when
compatibility set to [Wide bandwidth].
Submenu
Off Does not perform micro digital image shift.
Submenu
Adjust
Adjust
Chart
Submenu
Off Does not perform image registration.
Submenu
Red / Green /
Blue
Adjust
Chart
130
Function
Function
Function
Function
Function
Use the [ ] / [ ] buttons for
vertical shift and the [ ] / [ ]
buttons for horizontal shift.
Displays a chart to assist in
adjustment. Watch the chart as
you fine-tune the position.
Function
Function
Use the [ ] / [ ] buttons for
vertical shift and the [ ] / [ ]
buttons for horizontal shift.
Displays a chart to assist in
adjustment. Watch the chart as
you fine-tune the position.