Philips HD5720/30 User Manual page 11

2 Press the ^ or % button to select the desired coffee strength.
3 Press OK when the display shows the desired coffee strength.
4 Place 1 cup under the coffee spout to make 1 cup of coffee or 2 cups
to make 2 cups of coffee.
For creamier coffee, pull the spout downwards to bring it as close to the
cups as possible.
Tip: To keep the coffee hot longer, preheat the cups you use. Especially heat
up thick cups, as they absorb a lot of heat. To preheat the cups, put them on
the cup warmer tray when the appliance is switched on or rinse them with hot
water before use.
5 Press the button for short coffee, for standard coffee or for long
coffee.
Press the button once for 1 cup or twice within 2 seconds for 2 cups.
- You can interrupt the brewing process at any time by pressing the
button for short coffee, for standard coffee or for long coffee, as
previously selected.
- If the coffee comes out one drop at a time, not at all or too fast, adjust
the grinding coarseness (see section 'Adjusting the coffee mill').
- You can also change the standard amount of coffee the appliance
brews, see section 'Changing the coffee quantity for espresso' below.
The appliance grinds the beans and brews coffee.
,
Once the set amount of coffee has been brewed, the appliance
,
automatically stops brewing and ejects the coffee grounds into the
waste bin.
After a few seconds, 'READY TO USE' appears on the display to
,
indicate that you can brew the next cup of coffee.
6 If the message 'EMPTY WASTE BIN!' appears, remove the waste
bin and empty and clean it.
Note: The message 'EMPTY WASTE BIN!' appears after every 14 cups. When
it appears, you cannot brew coffee again until you empty and clean the waste
bin.
1 Open the service door at the front by pulling the latch.
EnglisH
11