Table of Contents
Advertisement
1x resin filled control unit
complete with wiring
6x 10° angled
external adapters
Ø 18-20mm
Sensors and adapters can be spray painted before assembly to match the color of the vehicle (optional). To spray paint proceed as follows:
1.
Use isopropyl alcohol to clean the sensors and the adapters and let dry. Avoid touching the cleaned surfaces.
2.
Insert the selected adapters in the supplied cardboard template:
Inner adapters fully insert into the cardboard template slots from the top side.
Outer adapters => press halfway down the slots, up to the side tabs, from the top side.
3.
The sensors must be inserted in the slots from underneath the cardboard. For a perfect spray-paint finish, we recommend turning down the black silicone seal
around the sensor head before inserting the sensor into the slots (paint might not adhere to the silicone).
4.
Fold the cardbox template into a box. Spray paint the sensors and the adapters and let dry thoroughly before assembling.
NB: Too much spray paint can impair the sensors performance.
3.0 – KIT CONTENTS
1x acoustic warning
buzzer for programming
complete with wiring
6x standard external
adapters
4.0 - TOOLS
5.0 - SPRAY PAINT - SENSOR HEADS AND ADAPTERS
Designed and manufactured by GEMINI TECHNOLOGIES srl ‐ Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy
Tel. +39 0332 943211 – Fax +39 0332 948080 – www.gemini‐alarm.com
ISO 9001 CERTIFIED COMPANY
6x sensors
6x 10°angled inner
adapters
8x cable clips
extension cables
16x zip-ties
6x standard inner
12x adhesive pads
adapters
2x 2-meter
Rev.01 07/2018
2/9
Advertisement
Table of Contents
