Kit Contents - Gemini 514 User Manual

1x control unit (ECU)
4x 10° angled
external adapters
Ø 18-20mm
Sensors and adapters can be spray painted before assembly to match the color of the vehicle (optional). To spray paint proceed as follows:
1. Use isopropyl alcohol to clean the sensors and the adapters and let dry. Avoid touching the cleaned surfaces.
2. Insert the selected adapters in the supplied cardboard template:

Center adapters => fully insert into the cardboard template slots from the top side.

Outer adapters => press halfway down the slots, up to the side tabs, from the top side.
3. The sensors must be inserted in the central slots from underneath the cardboard. For a perfect spray-paint finish, we recommend turning down
the black silicone seal around the sensor head before inserting the sensor into the slots (paint might not adhere to the silicone).
4. Fold the cardbox template into a box. Spray paint the sensors and the adapters and let dry thoroughly before assembling.
NB: Too much spray paint can impair the sensors performance.
WIRED REAR PARKING SENSOR KIT 514
KIT CONTENTS
1x buzzer
4x standard external
adapters
SPRAY PAINT - SENSOR HEADS AND ADAPTERS
4x sensors
4x 10°angled inner
adapters
TOOLS
2/10
4x cable clips
1x wire harness
10x zip-ties
4x standard inner
8x adhesive pads
adapters
Rev.01 09/2015