Programming can be done using the 2 buttons on the buzzer or via a user-friendly PC software
Programmable parameters
STOP zone => Inner Sensors
MAXIMUM distance => Inner Sensors
STOP zone => Outer Sensors
MAXIMUM distance => Outer Sensors
Rear spare tire or tow bar intelligent detection
(allows the system to see past the obstruction)
Setup => Auxiliary sensors 1-6
STOP zone => Auxiliary sensors
MAXIMUM distance => Auxiliary sensors
*
A user friendly PC software allows more flexibility in programming the parameters. The dedicated interface also allows reading and overwriting previously configured
parameters. Please contact us for more information.
12.0 - PARAMETER CONFIGURATION TABLE
Sensitivity
Buzzer volume
Detection beam width
Wireless pairing
Designed and manufactured by GEMINI TECHNOLOGIES srl ‐ Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy