Operation Mode And Temperature Setpoint; To Start/Stop Operation Mode And To Set The Temperature - Daikin FTXF25D5V1B User Reference Manual

5 | Operation

5.3 Operation mode and temperature setpoint

5.3.1 To start/stop operation mode and to set the temperature

User reference guide
18
Feature
ON timer + OFF timer
When. Adjust the system operation mode and set the temperature when you want
to:
▪ Heat up or cool down a room
▪ Blow air in a room without heating or cooling
▪ Decrease the humidity in a room
What. The system operates differently, depending on the user selection.
Setting
Automatic
Drying
Heating
Cooling
Fan
Additional info:
▪ Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪ Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
To automatically turn ON or OFF the system.
The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
The system decreases the humidity in a room.
The system heats up a room to the temperature
setpoint.
The system cools down a room to the
temperature setpoint.
The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
Tasks
Description
FTXF20~42D5V1B + ATXF20~42D5V1B
Daikin room air conditioners
4D520466-13G – 2021.12