About The User Interface - Daikin FTXF25D5V1B User Reference Manual

3 | About the system

3.2 About the user interface

User reference guide
12
f Model name plate
g Room temperature sensor
h Signal receiver
i Operation indicator (green)
j Timer lamp (orange)
k Indoor unit ON/OFF switch
l Air filter
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on the indoor unit
to start/stop operation. When operation is started using this button, the following
settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
▪ Direct sunlight. Do NOT expose the user interface to direct sunlight.
▪ Dust. Dust on the signal transmitter or receiver will reduce sensitivity. Wipe off
dust with a soft cloth.
▪ Fluorescent lights. Signal communication might be disabled if fluorescent lamps
are in the room. In that case, contact your installer.
▪ Other appliances. If the user interface signals operate other appliances, move
the other appliances, or contact your installer.
▪ Curtains. Make sure that the signal between the unit and the user interface is
NOT blocked by curtains or other objects.
NOTICE
▪
Do NOT drop the user interface.
▪
Do NOT let the user interface get wet.
FTXF20~42D5V1B + ATXF20~42D5V1B
Daikin room air conditioners
4D520466-13G – 2021.12