Electrolux EOD6P40X User Manual page 31

Problem
You want to activate the
True Fan Cooking PLUS
function, but the Plus
Steam indicator does not
switch on.
You want to activate the
cleaning function, but the
display shows "C4".
The water in the cavity em‐
bossment does not boil.
The water comes out of
the cavity embossment.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
The display shows "12.00". There was a power cut.
Possible cause
The Plus Steam does not
work.
The Plus Steam is press‐
ed.
The temperature is too low. Set the temperature at
There is too much water in
the cavity embossment.
The demo mode is activa‐
ted.
ENGLISH
Remedy
Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
Refer to "Activating the
function: True Fan Cooking
PLUS".
Press the Plus Steam
again.
least to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
1. Deactivate the oven.
2. Press and hold at the
same time
.
3. The first digit on the
display and Demo indi‐
cator start to blink.
4. Enter the code 2468 by
turning the knob for the
temperature right or left
to change the values
and press to con‐
firm.
5. The next digit starts to
blink.
6. Demo mode deacti‐
vates when you con‐
firm the last digit and
the code is correct.
Reset the clock.
31