Electrolux EOD6P40X User Manual page 10

10 www.electrolux.com
Oven func‐
tion
Turbo Grilling
Pyrolysis
6.3 Setting a heating function
1. Turn the knob for the heating
functions to select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven
operates.
3. To turn off the oven, turn the knob for
the heating functions to the off
position.
6.4 Setting the function: True
Fan Cooking PLUS
This function increases humidity during
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns.
After the function stops, carefully open
the door.
1. Fill the cavity embossment with tap
water.
Application
To roast larger meat
joints or poultry with
bones on one shelf po‐
sition. To make gratins
and to brown.
To turn on the pyrolytic
cleaning of the oven.
This function burns off
residual dirt in the oven.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION!
Do not refill the cavity
embossment during
cooking or when the
oven is hot.
2. Set the function:
3. Press: Plus Steam
It works only with the function: True Fan
Cooking PLUS.
The indicator turns on.
4. Turn the control knob to set
temperature.
5. Preheat the empty oven for 10
minutes to create humidity.
6. Put food in the oven.
Refer to "Hints and tips" chapter.
Do not open the oven door during
cooking.
7. Turn the knob for the heating
functions to the off position, press
Plus Steam
The indicator turns off.
8. Remove water from the cavity
embossment.
WARNING!
Make sure that the oven
is cold before you
remove the remaining
water from the cavity
embossment.
.
.
to turn off the oven.