Samsung AC BN6DCH Series Installation Manual page 36

Installation Procedure
Option SEG1
Function Page
Indication Details
Indication
and details
0
Option SEG7
Function Page
Indication Details
Indication
and details
1
CAUTION
• The main address must be set to a value in the range
0 to 14. If you set other values, communication error
will occur.
• If any of SEG5 and SEG6 is set to a value in the range
A to F, the main address of the indoor unit does not
change.
• If SEG3 is set to 0, the indoor unit maintains the
existing main address even if SEG6 is set to a new
value.
• If SEG9 is set 0, the indoor unit maintains the existing
RMC address even if SEG11 and SET12 are set to new
values.
Setting the installation options in a batch
Option No. for an indoor unit address:
02XXXX-1XXXXX-2XXXXX-3XXXXX
1 Make sure that the power is supplied to the indoor
unit. If the indoor unit is not plugged in, it must include
a power supply.
36
English
SEG2 SEG3
Mode Setting main address
Indication Details Indication
0
A
1
SEG8 SEG9
Setting RMC address
Indication
0
Reserved
1
SEG4 SEG5
Indoor unit number
Details Indication
No main
address
Reserved
Main
0 to 1
address
setting
mode
SEG10 SEG11
Group channel (x16)
Details Indication
No RMC
address
Reserved
RMC
RMC1
address
setting
mode
2 Make sure that the panel is connected to the indoor
unit so that it can receive options
3 Set the installation options of indoor units, by referring
to the following table and by following the steps in
Common steps for setting the addresses and options
on page 26.
• The installation options of indoor units are set to
020010-100000-200000-300000 by default.
• The SEG20 option, Individual control with remote
control, allows you to control multiple indoor units
individually by using the remote control.
SEG6
Indoor unit number
Details Indication Details
Tens digit 0 to 9 Units digit
SEG12
Group address
Details Indication Details
0 to 2 RMC2 0 to F
Indoor Unit