Samsung AC BN6DCH Series Installation Manual page 31

c Make sure that you are entered to the mode for
setting the options:
2 Set the option values.
CAUTION
• The total number of available options are 24: SEG1 to
SEG24.
• Because SEG1, SEG7, SEG13, and SEG19 are the page
options used by the previous remote control models,
the modes to set values for these options are skipped
automatically.
Take the steps presented in the following table:
1 Set the SEG2 and SEG3 values:
a Set the SEG2 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG3 value by rotating the Wheel clockwise until the value you want to
set appears on the remote control display.
When you press the
2 Press the (Mode) button. Cool and On appear on the remote control display.
3 Set the SEG4 and SEG5 values:
a Set the SEG4 value by pressing the
value you want to set appears on the remote control display.
Steps
(Low Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the following order:
(Low Fan) button repeatedly until the
• Set a 2-digit value for each option pair in the following
SEG1 SEG2 SEG3
0 X X
SEG7 SEG8 SEG9
1 X X
SEG13 SEG14 SEG15
2 X X
SEG19 SEG20 SEG21
3 X X
On (SEG1 to SEG12)
SEG4 SEG5 SEG6
X X X
SEG10 SEG11 SEG12
X X X
SEG16 SEG17 SEG18
X X X
SEG22 SEG23 SEG24
X X X
Off (SEG13 to SEG24)
Remote control display
SEG2
SEG3
SEG4
English
31