Qtx HPWash200 User Manual

High power stage blinder 200w

HPWash200

Item ref: 154.051UK

User Manual

High Power Stage Blinder 200W

Please read through this manual thoroughly before use, any damage

caused by misuse of product will not be covered by warranty.

The HPWASH200 is a powerful 200W white LED stage-blinder for fully controllable light wash

to stage or audience. Linear dimming control via DMX or internal programs can provide a

smooth or immediate transition from blackout to full brightness. Housed in an all-metal casing

with fan cooling for durability and reliable operation.

In the box:

Your HPWASH200 should arrive with you in a single carton in good condition. The carton

should contain 1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.

In the event of a spillage, disconnect the mains and allow the unit to dry out naturally.

Qualified personnel should then check the unit before continuing use.

Please do not open cover, contains high voltage. This

product is not serviceable or repairable by the end user.

Please refer to qualified personnel for service and repair.

www.avsl.com

154.051UK User Manual

Table of Contents

Need help?

Do you have a question about the HPWash200 and is the answer not in the manual?

Page 1 In the box: Your HPWASH200 should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Page 2 Placement: • Use the included mounting bracket to fix to a stand or lighting truss • Use secondary safety fixings if mounting overhead. • Keep away from damp or dusty environments • Ensure adequate air-flow around the fixture housings • Ensure adequate access to controls and connections Cleaning: •...
Page 3 Warm white 4 max brightness set DMX mode: The HPWASH200 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
Page 4 Specifications: Power supply 110-240Vac, 50/60Hz (IEC) Power consumption 200W Fuse rating F2AL, 250Vac Light source 4x 50W White LED DMX channels Beam angle 40° Housing Full Metal, powder painted. Dimensions 270 x 270 x 140mm (Without bracket) Weight 3.1kg Troubleshooting: Check mains voltage is correct and outlet is switched on No power Check IEC lead and fuse (if fuse continually blows, refer to your...

154.051uk