Image 2–21
5.
Fine-tune the focus of the projected image horizontally, using points C and D on the following image as
reference points. The resolution / balance between both points should be the same.
•
If the balance is a bit off, gently move the lens horizontally to see if this makes any difference.
•
Use the focus ring at the end of the lens to help focus the image.
Image 2–22
6.
Once shift, tilt and focus is all as desired, tighten adjustment screws 1 – 4.
7.
Have a final check, using the focus feature and the focus ring of the lens. Repeat all previous steps if the
end result is not as desired.
A A
B B
Mounting the lens
R5914435. /00
UST-Lens for G100 series
19