Mounting The Lens Adapter - Barco UST-Lens Installation Manual

Mounting the lens

2.2 Mounting the lens adapter

How to mount
1. Slide the UST-adapter-hook onto the lens input side until it matches the bayonet flang.
2. Secure the adapter hook by turning it clockwise (bayonet fitting).
Image 2–6
Tip: Make sure that the contact points (C) of the lens are not covered by the adapter hook.
Image 2–7
C Contact points
3. Slide the UST-adapter cover onto the lens input and over the adapter hook as illustrated. Make sure the
contact points of the cover touch the contact points of the lens.
4. Fasten the adapter cover and hook, using the 7 hex screws provided in the kit.
12 R5914435. /00 UST-Lens for G100 series