Page 2
Barco nv Events Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com Barco nv Intelligent Displays Noordlaan 5, 8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.barco.com...
Page 3
Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.
1. TLD HB (1.6-2.0:1) Lens Kit Image 1-2 Move the handle of the lens anchor system to the left Image 1-3 Take the lens out of the lens block 1.3 Installing the new lens What has to be done? This new lens has to be installed on the SLM series projector. Necessary Tools No tools necessary.
1.4 Quick Lens Adjustment Quick zoom/focus adjustment 1. Press the Selection key *, Barco key. The zoom/focus menu will be displayed. (image 1-5) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
1. TLD HB (1.6-2.0:1) Lens Kit Quick shift adjustment 1. Press the Selection key *, Barco key. The zoom/focus menu will be displayed (image 1-5). 2. Press ENTER. The shift menu will be displayed. (image 1-6) 3. Push the cursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right.
1. TLD HB (1.6-2.0:1) Lens Kit 1.6 Cleaning the lens To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have de- veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deionized air.
Need help?
Do you have a question about the TLD HB 1.6 and is the answer not in the manual?
Questions and answers