Table of Contents
Advertisement
Mounting the lens
Tip: Adapt the lens clamp module, depending on how the lens has been mounted. If the lens
points to the left, use the full lens clamp. If the lens points upward, only use the bottom part.
Image 2–14
Use a 3 mm Allen wrench to release the 3 screws holding the parts together
Image 2–15
10.
In the case the lens points to the left side of the projector, you can also secure the lens and adapter plate
with 3 hex screws.
16
R5914435. /00
UST-Lens for G100 series
Advertisement
Table of Contents
