Troubleshooting; Cleaning And Maintenance - Dometic DRAWBAR Series Operating Manual

Troubleshooting

Fault
The device does not cool. Tempera-
ture indicator LEDs do not glow.
The device does not cool (plug is
inserted). Temperature indicator
LEDs glow.
The device does not cool (plug is
inserted). Temperature indicator
LEDs for 11 °C and 14 °C light up
permanently.
The interior LED lamp stays on per-
manently even when the wine cool-
ing drawer is closed.
The device does not cool sufficiently.
Temperature indicator LEDs glow.
The upper temperature indicator LED
flashes repeatedly for 1 time.
The upper temperature indicator LED
flashes repeatedly for 3 times.
The upper temperature indicator LED
flashes repeatedly for 4 times.
The upper temperature indicator LED
flashes repeatedly for 5 times.
The upper temperature indicator LED
flashes repeatedly for 6 times.

Cleaning and maintenance

!
WARNING! Fire hazard
• The refrigerant is highly flammable. Do
not open or damage the refrigerant
circuit.
• The insulation of the device contains
an insulating gas (see data plate).
Do not damage the insulation.
Possible cause
No voltage present in the AC volt-
age socket.
The cooling element is defective.
The demo mode is activated.
The presentation mode is activated. Switch off the presentation mode
The cooling element is defective.
The ventilation is insufficient.
The temperature sensor is defective. Contact authorized service agent for
The inner fan is defective.
The outer fan is defective.
The drawer is opened for too long.
The drawer is not closed properly.
The compressor is defective.
A
4445103438
Suggested remedy
Try using another plug socket.
Contact authorized service agent for
repair.
Switch off the demo mode (fig. 6,
page 4).
(fig. 5, page 4).
Contact authorized service agent for
repair.
Remove any obstruction or soiling
from the inlet and outlet vents.
repair.
Contact authorized service agent for
repair.
Contact authorized service agent for
repair.
Close the drawer.
Close the drawer properly.
Contact authorized service agent for
repair.
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or
hard objects during cleaning.
• Never use hard or sharp tools to
remove ice or to free frozen objects.
• Do not use any mechanical tools or any
other tools to speed up the defrosting
process.
9