Intermec PB50 User Manual page 64

Chapter A — Specifications
Recommended Media Sensitivity, Constant, Factor, and Print Speed
Sensitivity Constant
North American Label Media
720 60
470 52
450 48
430 100
180 80
180 80
180 80
150 50
54
External Fanfold Media Specifications
Stack height: 70 mm (2.75 in)
Page length: 152 mm (6 in) to 305 mm (12 in)
Note: A 6-inch page length is supplied in 12-inch long stacks (two 6-
inch stacks of equal height with the bottom page linked).
Specialty media is required for unique customer environments,
including printer operating temperature extremes. Media
performance is format and environment dependent. Not all media
will work in all customer applications. Intermec recommends that
you test the media in your application.
Supported Media
The PB50 printer supports direct thermal label, tag, and receipt
media. Both North American and European label media are
supported in multiple label lengths. Receipt media is supported in
both a top coated and an uncoated paper in continuous roll stock
only.
The default media sensitivity number is 180.
The default media sensitivity number for linerless media is 103
Use the following table as a guide when setting sensitivity numbers.
Factor Description
40 Duratherm Lightning Plus
40 Duratherm Lightning
40 Duratherm Lightning
40 Duratherm Synthetic
40 Duratherm II Label
40 Duratherm III Label
40 Duratherm Near IR
40 Duratherm 5 mil Tag
PB50 Mobile Label and Recept Printer User's Guide
Max Print Speed
4 ips
4 ips
2 ips
4 ips
4 ips
4 ips
4 ips
2 ips