Transducer Connection (Axiom Pro) - Raymarine AXIOM PRO Installation Instructions Manual

MFD connection
1 Port 1, positive input (White)
2 Port 1, negative input (Green)
3 Port 1, positive output (Yellow)
4 Port 1, negative output (Brown)
5 Port 2, positive input (Orange / White)
6 Port 2, negative input (Orange / Green)
Note:
Refer to instructions provided with your NMEA 0183 device for wire color, signal and port
information.

4.5 Transducer connection (Axiom Pro)

If your MFD includes a built-in sonar module then you can connect a transducer to your MFD.
• Axiom Pro RVX:
– 1 x 25 pin connector — connect to RealVision™ 3D transducers
– 1 x 11 pin connector — connect to 1kW transducers.
Connections
NMEA device connection
Positive output
Negative output
Positive input
Negative input
Positive output
Negative output
41