Additional Features; Controller Replication; Replicating The Network And Channel Settings - Intermatic HA07 Instructions Manual

Additional Features

The HA07 Master Controller allows you to create two different
types of copies of the primary remote controller:
- Replicating both Network and Channel settings will copy all
network information and scene information for each channel.
- Replicating the network only will copy network information
only. This gives you ability to customize the secondary con-
troller by associating different modules to each channel.

Controller Replication

Each network can have only 1 primary controller. However,
you may wish to have the use of more than one controller for
your system. To replicate (copy) the primary controller

Replicating the Network and Channel Settings

(See Fig 16a & 16b) On your Primary Controller:
1. Press and hold INCLUDE for 5 seconds. COPY will flash.
Release the INCLUDE button.
2. Press and release Channel 1 ON/DIM on the Primary
Controller. The display will show "TA" which means
"Transmit All information".
(See Fig 16c & 16d) On the Secondary controller:
3. Press and Hold INCLUDE for 5 seconds. COPY will
flash. Release the INCLUDE button.
4. Press and release Channel 1 OFF/DIM on the
Secondary Controller. The display will show "RA"
which means "Receive All information".
Page 28 of 35