Resetting the Controller
If needed, you can reset the NETWORK and CHANNEL SET-
TINGS individually or both together.
NOTE: When resetting a controller, for best results, each
module within the system should be individually reset also.
Resetting the NETWORK only
1. Press and hold INCLUDE and DELETE buttons at the
same time for 10 seconds. The display will read, "RESET".
2. Hold the Channel 3 ON/DIM and OFF/DIM buttons until
the display reads, "NETWRK CLEAR".
Follow the same procedure as Resetting the Network, except
press Channel 2 ON/DIM and OFF/DIM buttons in step 2. The
display will read, "CHAN CLEAR".
This reset function will completely reset the CLOCK, PRO-
GRAMMED EVENTS, CHANNEL, and NETWORK SETTINGS
on the controller.
Follow the same procedure as Resetting the Network, except
press Channel 1 ON/DIM and OFF/DIM buttons in step 2. The
display will read, "ALL CLEAR".
Page 31 of 35
Resetting CHANNELS only
Resetting NETWORK and CHANNELS