Safety Information - Eastwood 19867 Instructions Manual

Professional undercoating gun
Table of Contents

Advertisement

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
To order parts and supplies: 800.343.9353 >> eastwood.com
READ INSTRUCTIONS!
• Thoroughly read and understand these product instructions before using this
equipment. Failure to follow all warnings can result in tool damage or serious
physical injury.
• Keep these product instructions for future reference.
• Do Not use near sparks, open flame or other potential ignition source.
Solvents and Materials are highly combustible and may ignite or explode.
Keep at least 25' away from any non-explosion proof compressors, motors,
switches etc.
• Avoid breathing vapors produced by Spray Gun. Always wear appropriate
NIOSH approved breathing apparatus and use in a well-ventilated area.
• Wear appropriate ANSI standard Z87.1 eye protection.
• Wear solvent-resistant gloves.
• Do not allow unprotected persons or pets in the spray area.
• Do not exceed 150 psi (10 bar) of tool inlet pressure. Permanent tool damage
and/or bursting could occur and cause personal injury.
FIRE AND EXPLOSION HAZARD!
HEALTH HAZARD!
BURSTING HAZARD!
3

Advertisement

Table of Contents
loading

Table of Contents