Table of Contents
Advertisement
The EASTWOOD PROFESSIONAL UNDERCOATING GUN is precision engineered and designed
for use by the seasoned professional or hobbyist. With the wide range of material flow adjust-
ment and dual-capability set-up, it can apply many thicker bodied materials such as undercoat-
ing, bedliner and chip protecting film as well as thinner and rustproofing materials. The body is
constructed of a highly durable and lightweight aluminum with Stainless Steel internal compo-
nents which are compatible with both solvent and water-based products. Convenient reference
markings on the gun body and control knobs allow for accurate repeatability of gun settings.
Industrial design will provide many years of trouble-free service.
CONTENTS
(1) Professional Undercoating Gun
(1) One Quart Solvent Resistant Composite, Composite Material Cup
(3) Flexible Transparent Wands - 5' x 1/4":
- (1) Misting Head Wand
- (1) 360° Spray Head Wand
- (1) 90° Spray Head Wand
SPECIFICATIONS
Stainless Steel Internal Components
Working Pressure:
Approximate Air Consumption:
Air Input Threads:
Nozzle/Accessory Wand Thread: M11 x 0.75
Noise Level:
Multi-Configurable for Thick Heavy-Bodied or Thin Light Bodied Materials
2
40-80 psi (max 140 psi); [3-4 bar. (max 10 bar)]
7 to 10 CFM [200-300 L per min]
1/4" NPT
<80 dba.
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
