SAFETY INFORMATION
READ INSTRUCTIONS!
Thoroughly read and understand this instruction manual before using. Save manual for future reference.
FIRE AND EXPLOSION HAZARD!
•
DO NOT allow fl ammable paint spray or vapors to enter the air intake of the Turbine Unit! Keep the Turbine Unit away from the painting
area and in an elevated, secure position at all times.
•
Never use a coating or solvent with a fl ash point lower than 70°F (21°C). If unsure, refer to the MSDS for the particular products in question.
•
Do Not use near sparks, open fl ame or other potential ignition source.
HEALTH HAZARD!
•
Avoid breathing vapors produced by Spray Gun. Always wear appropriate NIOSH approved breathing apparatus and use in a well
ventilated area.
•
Wear appropriate eye protection.
•
Wear solvent-resistant gloves.
•
This device emits high sound levels, the use of appropriate hearing protection is strongly recommended. Never operate the Turbine
Unit without Paint Gun attached to hose.
ELECTRIC SHOCK HAZARD!
•
Never operate or store unit in damp or wet conditions.
•
If an extension cord is required, a 25' cord is recommended not to exceed 50'. All extension cords must be 14 AWG or greater.
•
Always unplug Turbine Unit before refi lling gun cup, cleaning or servicing the Paint Gun'
2
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com