Table of Contents
Advertisement
SAFETY INFORMATION
SET-UP
• Remove all components from carton, identify them and become familiar with their purpose.
• A 5/16" I.D. minimum air hose at a 25' maximum length is strongly recommended for best
results. Smaller I.D. hose and greater length may produce unsatisfactory results.
• A clean, dry, regulated air supply is required. The use of an additional "on the gun" regulator is
strongly recommended to accurately control gun pressure while painting.
• Clean out the paint cup as well as the paint gun air and paint passages with a solvent such
as Eastwood PRE or acetone to remove any residual manufacturing impurities before use
dry thoroughly.
To order parts and supplies: 800.345.1178 >> eastwood.com
READ INSTRUCTIONS!
Read and understand all instructions thoroughly.
FIRE AND EXPLOSION HAZARD!
Do Not use near sparks, open flame or other potential ignition source.
HEALTH HAZARD!
• Avoid breathing vapors produced by Spray Gun. Always wear appropriate NIOSH
approved breathing apparatus and use in a well ventilated area.
• Wear appropriate eye protection.
• Wear solvent-resistant gloves.
3
Advertisement
Table of Contents
