Chapter 5: Appendix
CHAPTER 4: APPENDIX
4.1 Warning Messages
When any of these warning messages appear, check the following items.
Warning Message
No Signal
CHANGING THE FOLLOWING SETTINGS IN OSD MENU MAY
INCREASE THE POWER CONSUMPTION OF YOUR MONITOR.
DO YOU WANT TO CONTINUE TO CHANGE?
A C C E P T
The LCD display cannot detect the
input source signal.
This warning message box will
only show when the menu feature
setting is changed for the first time.
C AN C E L
Cause
18
Solution
√ Check if the input source is
turned ON.
√ Check if the signal cable is
properly connected.
√ Check if any pin inside the
cable connector is twisted or
broken.
• Press the ACCEPT button to
continue the setting changes,
or press the CANCEL button to
disable the setting changes.
• Note: The operation may vary
from different product models.