Cleaning The Lint Trap - Hanseatic HTW610D User Manual

(18) (25)
5. Unscrew the water inlet hose from the
appliance.
(25)
(26)
(31)
6. Use tweezers or a pair of pliers to pull the
filter (25) with gasket (26) out of the union
nut (31). Rinse the filter under fresh water
and clean with a small, soft brush if nec-
essary.
7. Re-insert the filter and screw the water
inlet hose back onto the appliance.
8. Open the valve to check whether the
hose and connections are sealed.
Care and maintenance

Cleaning the lint trap

WARNING!
Risk of scalding!
Improper handling of the appliance
can lead to scalding caused by hot suds.
■ Allow soapy water to cool before re-
moving the lint trap.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■ When draining in an emergency, sub-
stantial amounts of water can leak
out.
The lint trap stops threads
and other foreign bodies ending up in the
pump with the suds. Clean the lint trap every
3 months.
1. Switch off the appliance and take the
mains plug out of the socket.
2. Close the valve.
3. Carefully open the shutter (17) of the lint
trap with a flat object, such as with a flat-
tip screwdriver.
Page EN-27
(17)