Technical Specifications - Microlife OXY 500 BT Manual

tested using alcohol before and after each test. Allow the
device to dry thoroughly before use.
Never use abrasive cleaning agents, thinners or
benzene for cleaning and never immerse the
device in water or other cleaning liquids.
13. Guarantee
This device is covered by a 2 year guarantee from the date
of purchase. During this guarantee period, at our discre-
tion, Microlife will repair or replace the defective product
free of charge.
Opening or altering the device invalidates the guarantee.
The following items are excluded from the guarantee:
 Transport costs and risks of transport.
 Damage caused by incorrect application or non-
compliance with the instructions for use.
 Damage caused by leaking batteries.
 Damage caused by accident or misuse.
 Packaging/storage material and instructions for use.
 Regular checks and maintenance (calibration).
 Accessories and wearing parts: Battery.
Should guarantee service be required, please contact the
dealer from where the product was purchased, or your local
Microlife service. You may contact your local Microlife
6
service through our website:
www.microlife.com/support
Compensation is limited to the value of the product. The
guarantee will be granted if the complete product is
returned with the original invoice. Repair or replacement
within guarantee does not prolong or renew the guarantee
period. The legal claims and rights of consumers are not
limited by this guarantee.

14. Technical Specifications

Type: Fingertip Pulse Oximeter OXY 500 BT
Display: OLED display
Display range: Oxygen saturation: 35 - 100 %
Pulse rate: 25 - 250 bpm
Resolution: Oxygen saturation: 1 %
Pulse rate: 1 bpm
Measurement Oxygen saturation:
precision: ±2 % (70 - 100 %)
No requirement: (≤ 69 %)
Pulse rate: ± 2 bpm
Alert range:
Oxygen saturation: Upper limit: 50 - 100 %
Lower limit: 50 - 100 %
Pulse rate: Upper limit: 25 - 250 bpm
Lower limit: 25 - 250 bpm
Alert error: Oxygen saturation: ± 1 % of the
preset value
Pulse rate: the greater of ± 10% of the
preset value and ± 5 bpm
PI (Perfusion Index)
Weak PI Min. 0.2 %