CDA SV 980 Installation, Use And Maintenance Manual page 25

25
Replace the Glass Retainer
1. Position the glass retainer, as shown in the figure 12. It should sit on the bottom edge of the outer glass.
Check that the clamps M are not deformed or damaged.
2. Gently push the glass retainer back into place. You should be able to hear the tabs on both sides click as
they lock the glass retainer in.
Important !
Make sure the glass retainer is correctly and firmly in place and that the glass pane is secure.
2
click
M
1
M
1
M
2
click
Fig. 12