CDA SV 980 Installation, Use And Maintenance Manual page 19

Replacing the Halogen Oven Lights
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
- Let the oven cavity and the heating elements to cool down;
- Switch off the electrical supply;
- Remove the protective cover C (fig. 7);
- Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (check watt
power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your fingers can cause premature failure.
Always use a clean cloth or gloves.
- Refit the protective cover;
Note: Oven bulb replacement is not covered by your guarantee.
C
B
Fig. 7
WRONG
CORRECT
C
B
19