EXCELL PRECISION CO., LTD.
3. Press
key
TARE
Weight of the object without container
Pre-Tare function is also available even if tare is in operation.
If the net weight on platter is more than zero weight, the tare function is available. Otherwise,
it's not capable of tare function.
Clear off Pre-tare value
After removing the object together with packaging container, weight column will display the
negative weight value of the packaging container. Press
pre-tare value and return to zero. Then the tare and pre-tare symbol " " will disappear.
Recall Pre-tare value
1. Press
Q'TY PRSET
Pre-tare value
2. After displays pre-tare value about 5 seconds, it automatically returns to the weighing mode
Recall pre-tare value function and clear function are not available for Standard keypad
models.
2-7 Accumulation
The accumulation counts are up to 99 counts, but the total quantity column is at most 6 digits.
Users cannot do positive accumulation and negative accumulation at the same time.
2-7-1 Quantity Accumulation
1. Place an object on platter
Weight of the object on platter
2. Press
key
M+
3. After scale is stable
Accumulated total weight
4. After about 3 seconds, scale returns to counting mode
Weight of the object on platter
03005XXX/03006XXX
.
.
Unit weight of the object
key, and then press
.
.
.
.
.
Unit weight of the object
.
Accumulated total counts
.
.
Unit weight of the object
stable
Quantity without packaging container
key once again to cancel the
TARE
key
TARE
stable
stable
stable
Quantity of the object on platter
+
stable
Accumulated total quantity
+
stable
Quantity of the object on platter
11
ZSME200000060