Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
Chapter 2 Operation
2-1 Power On
SW switch on (Press SW to location " ")
WEIGHT
WEIGHT
After return to zero and being stable, scale will enter into counting mode.
2-2 High and Low Resolution Shift Setting
Only for 1/3,000 resolution models
The function is subject to OIML and Brazil Approval models.
Press
key and then release this key in 2.5 seconds until 3 seconds, this key has decimal
function.
Press
key and then not to release in 3 seconds, the resolution in weight column will
convert to 1/30,000 and return back to 1/3,000 in 5 seconds.
When resolution converts to 1/30,000,
2-3 Zero Function
While operating the scale, zero may sometimes fluctuate. (Slight weight changes happen in
weight column.) Press
2-4 Obtain Unit Weight
2-4-1 Through Sampling
1. Place the sampling object on platter
.
Weight on platter
2. Enter the quantity of the sample on platter
.
Weight on platter
The number of quantity column will flash 6 seconds. If the user doesn't press the
key before flashing is over, the scale will complete the unit weight setting procedure
automatically after flashing. The scale will also take the number that inputted in unit weight
column as the unit weight of object to calculate the quantity of object shown in quantity column.
03005XXX/03006XXX
UNIT WEIGHT
After stable, the scale will count back to zero.
UNIT WEIGHT
600 ⇒ Maximum countable data: 600 000
key to return to zero.
ZERO
Enter the sampling quantity
key and Printer are not available.
8
QUANTITY
QUANTITY
Sampling Speed
SAMPLE
ZSME200000060
Advertisement
Table of Contents
